SpectraCore 180 Soft UV Safe Lighting System
SpectraCore 180 is ideally suited for Fine Art Reproduction and Cultural Heritage Imaging.
The quality of light determines the accuracy of your captured color. The SpectraCore LED soft light was designed with custom LED phosphors to provide the most accurate color capture possible.
SpectraCore 180 offers very even lighting throughout,with no hot spots. It is extremely bright, measuring 5600 lux @ 1 meter (when not dimmed).
NATURAL VIEWING TEMPERATURE
Single color LEDs offer a higher level of color accuracy than blended LED lighting. SpectraCore 180 is a single source LED light at 5000 kelvin, which offers a very balanced light—neither warm nor cool. This “neutral daylight” color temperature is visually accurate, even in reds and blues. An added benefit is that 5000K is the graphic arts viewing standard, so the SpectraCore 180 can also be used for proofing, when dimmed to 2000 lux @ 1 meter.
LOW OPERATING TEMPERATURE
LED cores typically operate at 210°F. The SpectraCore 180 core was designed to operate at a significantly lower temperature, typically 150-160°F. This extends the operating life and working conditions of the LEDs. It also assures that there will be minimal temperature radiated to the ambient
environment, making this is ideal for photographing rare and fragile art work.
FLICKER-FREE, EVEN WHEN DIMMED
SpectraCore 180 features smooth flicker-free dimming from 5% to 100%, while maintaining the same CRI levels and color temperature (kelvin) at any brightness level. SpectraCore 180 does not use pulse-width modulation, which can cause flickering in many LED lights.
UL LISTED IN THE US AND CANADA
SpectraCore 180 has been independently tested and certified for fire, electrical, and mechanical safety by UL.
■CRI (Color Rendering Index) 98+
■Full visible spectrum
■No UV energy — suitable for fine art and cultural heritage items
■Fixed 5000K balanced daylight color temperature
■Soft light — no hard shadows
■5600 lux @ 1m (100% power)
■Dimming mode: Smooth dimming from 5% to 100%, with no color shift or CRI shift throughout the entire range
■Flicker-free performance, even when dimmed
■Does not use pulse-width modulation, which can cause flickering in many LED lights
■Two years from date of purchase
■Covers all parts and labor
■Extended Warranty available for $500/year to cover all parts and labor, and replacement of LED panel if the unit falls out of range*
■Extended Warranty must be purchased during warranty period and renewed annually.
■Horizontal and Vertical mounting options
■Ability to stack lights together with optional hardware (not included)
■Yoke and yoke mount included
■75/100 mm VESA compatible (VESA mount hardware not included)
SPECTRACORE CONNECT CONTROLLER OPTION
■Flash strobe capability
■Controls up to 20 lights in a daisy chain configuration
■With yoke: 22.2” x 15.6” x 4.1”
■Without yoke: 19.8” x 13.9” x 4.1”
■13.5 lbs/6.1 kg POWER
■Voltage: 120V AC
■Frequency: 60 Hz
■Maximum Power Draw: 180W Max
■Steel front frame allows filters and gels to be attached with magnets
■Lightweight aluminum back housing
■UL Certified and Listed with UL registered components; inspected quarterly by UL
■ Two years from date of purchase
■ Covers all parts and labor
■ Extended Warranty available for $500/year to cover all parts and labor, and replacement of LED panel if the unit falls out of range*
■ Extended Warranty must be purchased during warranty period and renewed annually.
Find Similar Products by Category
Customers also viewed